Connecting to your Control Hub

Connecting to Your Control Hub

1. Power on you your control hub.

2. Open a computer and navigate to the WIFI settings at the bottom right corner.

3. Look for the the correct WIFI network and connect to it.

NOTE: The WIFI network name and password are listed under the program and manage tab on the driver station.

On your computer navigate open a web browser and go to 192.168.43.1:8080

if you are using a phone instead of a control hub you will need to go to 192.168.49.1:8080

it should look something similar to this:

At the top of your screen click on theOnBotJava tab

You should see this screen:

1. Create New Op Mode - The plus sign button opens up a window to create a new op more.

2. Project Browser Pane - This pane shows all the java project files on the Robot Controller.

3. Source Code Editing Pane - This pane is the main code editing area.

4. Message Pane - This pane provides messages on the success or failure of code builds.

5. Build Everything - Builds all of the .java files on a Robot Controller.